Τα υλικά που θα χρειαστούμε για το συγκεκριμένο project είναι τα εξής:
1. Arduino Dueminalove
2. USB καλώδιο
3. Breadboard
4. Καλώδια διάφορων χρωμάτων
5. Μία αντίσταση 10K
6. Ένα pushbutton
7. Ένα LED κόκκινου χρώματος
ΤΟ ΚΥΚΛΩΜΑ:
* Τις πληροφορίες για το project τις έχω αντλήσει από το www.arduino.cc
1. Arduino Dueminalove
2. USB καλώδιο
3. Breadboard
4. Καλώδια διάφορων χρωμάτων
5. Μία αντίσταση 10K
6. Ένα pushbutton
7. Ένα LED κόκκινου χρώματος
ΤΟ ΚΥΚΛΩΜΑ:
- Κώδικας:
ΤΟ ΠΡΟΓΡΑΜΜΑ:
// constants won't change. They're used here to
// set pin numbers:
const int buttonPin = 2; // the number of the pushbutton pin
const int ledPin = 13; // the number of the LED pin
// variables will change:
int buttonState = 0; // variable for reading the pushbutton status
void setup() {
// initialize the LED pin as an output:
pinMode(ledPin, OUTPUT);
// initialize the pushbutton pin as an input:
pinMode(buttonPin, INPUT);
}
void loop(){
// read the state of the pushbutton value:
buttonState = digitalRead(buttonPin);
// check if the pushbutton is pressed.
// if it is, the buttonState is HIGH:
if (buttonState == HIGH) {
// turn LED on:
digitalWrite(ledPin, HIGH);
}
else {
// turn LED off:
digitalWrite(ledPin, LOW);
}
}
* Τις πληροφορίες για το project τις έχω αντλήσει από το www.arduino.cc